GE Industrial Solutions Galaxy Power Systems - Manual (Page 201)

Installation Guide for Galaxy Power Systems
Issue 12 August 2012 Power Up and Installation Completion 15 - 17
Setting the Low-Voltage Load Disconnect Feature
Setting the LVLD Feature
Step Action
1 To enable LVLD, enter the appropriate key sequence:
• Galaxy Millennium Controller: 

Main
 Config  LVD (Basic) or Low V Disc
(Intelligent)  Contactor 2  Type-Load  Enter
• Galaxy Vector Controller: 

Main  Configuration  Contactors  Contactor 2
 Type (Set to Load)  Save
Note: The LVLD configuration must be set. No alarm lights
will show if this is not set.
Continued on next page.