Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 121)

Brocade Mobility 7131N-FGR Product Reference Guide 109
53-1001947-01
Configuring the LAN interface
5
3. Specify a lease period in seconds for available IP addresses using the DHCP Lease Time
(Seconds) parameter. An IP address is reserved for re-connection for the length of time you
specify. The default interval is 86400 seconds.
4. Click the Add button to create a new table entry within the Reserved Clients field.
If a statically mapped IP address is within the IP address range in use by the DHCP server, that
IP address may still be assigned to another client. To avoid this, ensure all statically mapped IP
addresses are outside of the IP address range assigned to the DHCP server.
If multiple entries exist within the Reserved Clients field, use the scroll bar to the right of the
window to navigate.
5. Click the Del (delete) button to remove a selected table entry.
6. Click OK to return to the LAN1 or LAN2 page, where the updated settings within the Advanced
DHCP Server screen can be saved by clicking the Apply button.
7. Click Cancel to undo any changes made. Undo Changes reverts the settings displayed to the
last saved configuration.
Setting the type filter configuration
Each Brocade Mobility 7131N-FGR Access Point LAN (either LAN1 or LAN2) can keep a list of frame
types that it forwards or discards. The Type Filtering feature prevents specific (a potentially
unneccesary) frames from being processed by the Brocade Mobility 7131N-FGR Access Point in
order to improve throughput. These include certain broadcast frames from devices that consume
bandwidth, but are unnecessary to Brocade Mobility 7131N-FGR Access Point operations.
Use the Ethernet Type Filter Configuration screen to build a list of filter types and configure them as
either allowed or denied for use with the this particular LAN.
To configure type filtering on the Brocade Mobility 7131N-FGR Access Point: