Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 231)

Brocade Mobility 7131N-FGR Product Reference Guide 219
53-1001947-01
Viewing LAN statistics
7
1. Select Status and Statistics -> LAN Stats -> LAN1 Stats (or LAN2 Stats) from the Brocade
Mobility 7131N-FGR Access Point menu tree.
2. Refer to the Information field to view the following Brocade Mobility 7131N-FGR Access Point
device address information:
Status Displays whether this particular LAN has been enabled as viable
subnet from within the LAN Configuration screen.
IP Address The Internet Protocol (IP) addresses for the Brocade Mobility
7131N-FGR Access Point LAN port.
Network Mask The first two sets of numbers specify the network domain, the next
set specifies the subset of hosts within a larger network. These
values help divide a network into subnetworks and simplify routing
and data transmission.
Ethernet Address The Media Access Control (MAC) address of the Brocade Mobility
7131N-FGR Access Point. The MAC address is hard coded at the
factory and cannot be changed. For more information on how
access point MAC addresses are assigned, see
“MAC address
assignment” on page 22.
Link The Link parameter displays Up if the LAN connection is active
between the Brocade Mobility 7131N-FGR Access Point and
network, and Down if the LAN connection is interrupted or lost.
Use this information to assess the current connection status of
LAN 1 or LAN2.