Br7131n>admin(system.snmp.access)> delete – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 445
Brocade Mobility 7131N-FGR Product Reference Guide
433
53-1001947-01
System commands
8
BR7131N>admin(system.snmp.access)> delete
Deletes SNMP access entries for specific v1v2 and v3 user definitions.
Syntax
Example
admin(system.snmp.access)>list acl
-----------------------------------------------------------------------------
index start ip
end ip
-----------------------------------------------------------------------------
1
209.236.24.1
209.236.24.46
admin(system.snmp.access)>delete acl all
admin(system.snmp.access)>list acl
-----------------------------------------------------------------------------
index start ip
end ip
-----------------------------------------------------------------------------
For information on configuring SNMP access settings using the applet (GUI), see
delete
acl
<idx>
Deletes entry <idx> (1-10) from the access control list.
all
Deletes all entries from the access control list.
v1v2c
<idx>
Deletes entry <idx> (1-10) from the v1/v2 configuration list.
all
Deletes all entries from the v1/v2 configuration list.
v3
<idx>
Deletes entry <idx> (1-10) from the v3 user definition list.
all
Deletes all entries from the v3 user definition list.