Br7131n>admin(network.router)> set – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual

Page 408

Advertising
background image

396

Brocade Mobility 7131N-FGR Product Reference Guide

53-1001947-01

Network commands

8

BR7131N>admin(network.router)> set

Shows the access point route table.

Syntax

For information on configuring the Router options available to the access point using the applet
(GUI), see

“Configuring router settings”

on page 153.

set

auth

Sets the RIP authentication type (none, simple or MD5).

dir

Sets RIP direction (rx, tx or both)

id

Sets MD5 authetication ID (1-256) for specific index (1-2).

key

Sets MD5 authetication key (up to 16 characters) for specified inded (1-2).

passwd

Sets the password (up to 16 characters) for simple authentication.

type

Defines the RIP type (off, ripv1, ripv2, or ripv1v2).

dgw-iface

Sets the default gateway interface (lan1, lan2, wan or none).

Advertising