Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 503)

Brocade Mobility 7131N-FGR Product Reference Guide 491
53-1001947-01
System commands
8
BR7131N>admin(system.config)> set
Sets the import/export parameters.
Syntax
Example
admin(system.config)>set server 192.168.22.12
admin(system.config)>set user myadmin
admin(system.config>set passwd georges
admin(system.config)>show
Warning: This will display secure information,
Do you want to continue? (n/y?)y
cfg filename : cfg.txt
cfg filepath :
sftp server ip address : 192.268.0.10
sftp user name :
admin(system.config)>
For configuration file creation and export, only the set radio-config is supported. Therefore, when
configuration files for export are created, a line such as set rf-function X wips / wlan (where X is 1
or 2) is never be generated.
For configuration file import, the legacy command set rf-function X wips / wlan is
processed as it has historically.
There is no CLI menu allowing the user to enter set rf-function X wips/wlan (where X is
1 or 2).
Instead, the command set radio-configX (where X is 1,2,3,4,5,6,7, or 8) is created in the
configuration files for export.
For information on importing/exporting access point configurations using the applet (GUI), see
“Importing/exporting configurations” on page 92.
set file <filename> Sets the configuration file name (1 to 39 characters in length).
path <path> Defines the path used for the configuration file upload.
server <ipaddress> Sets the SFTP server IP address.
user <username> Sets the SFTP user name (1 to 39 characters in length).