Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 163)

Brocade Mobility 7131N-FGR Product Reference Guide 151
53-1001947-01
Enabling Wireless LANs (WLANs)
5
8. Use the Primary WLAN drop-down menu to select a WLAN from those WLANs sharing the same
BSSID. The selected WLAN is the primary WLAN for the specified BSSID.
9. Click Apply to save any changes to the Radio Settings and Advanced Settings screens.
Navigating away from the screen without clicking Apply results in changes to the screens being
lost.
10. Click Undo Changes (if necessary) to undo any changes made to the screen and its
sub-screens. Undo Changes reverts the settings to the last saved configuration.
11. Click Logout to securely exit the Access Point applet. A prompt displays confirming the logout
before the applet is closed.
Configuring MU rate limiting
Use the Rate Limiting screen to control the MU rate limit allotted to individual WLANs. MU rate
limiting enables an administrator to determine how much radio bandwidth is allowed to each MU
within any one of the 16 supported AP WLANs.
To define MU rate limits for specific WLANs on an access point radio:
WLAN Lists the WLAN names available to the 802.11a/n or 802.11b/g/n
radio that can be assigned to a BSSID.
BSSID Assign a BSSID value of 1 through 4 to a WLAN in order to map the
WLAN to a specific BSSID.
BC/MC Cipher A read only field displaying the downgraded BC/MC
(Broadcast/Multicast) cipher for a WLAN based on the BSSID and
VLAN ID to which it has been mapped.
Status Displays the following color coded status:
Red - Error (Invalid Configuration)
Yellow - Warning (Broadcast Downgrade)
Green - Good (Configuration is OK)
Message Displays the verbal status of the WLAN and BSSID assignments. If
the Status column displays green, the Message will typically be
Configuration is OK. If yellow, a description of invalid configuration
displays.