Br7131n>admin(stats)> flash-all-leds – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 520
Advertising
508
Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
System commands
8
BR7131N>admin(stats)> flash-all-leds
Starts and stops the illumination of a specified access point’s LEDs.
Syntax
Example
admin(stats)>
admin(stats)>flash-all-leds 1 start
Password ********
admin(stats)>flash-all-leds 1 stop
admin(stats)>
For information on flashing access point LEDs using the applet (GUI), see
flash-all-leds
<index>
Defines the Known AP index number of the target AP to flash.
<stop/start> Begins or terminates the flash activity.
Advertising