Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 154)

142 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Enabling Wireless LANs (WLANs)
5
Once the target radio has been enabled from the Radio Configuration screen, configure the
radio’s properties by selecting it from the Brocade Mobility 7131N-FGR Access Point menu
tree.
For more information, see “Configuring the 802.11a/n or 802.11b/g/n radio” on page 142.
Configuring the 802.11a/n or 802.11b/g/n radio
Configure an 802.11a/n or 802.11b/g/n radio by selecting the radio’s name (as defined using the
802.11a/n or 802.11b/g/n radio configuration screen described below) as a sub-menu item under
the Radio Configuration menu item. Use the radio configuration screen to set the radio’s
placement properties, define the radio’s threshold and QoS settings, set the radio’s channel and
antenna settings and define beacon and DTIM intervals.
To configure the Brocade Mobility 7131N-FGR Access Point’s 802.11a/n or 802.11b/g/n radio:
1. Select Network Configuration -> Wireless -> Radio Configuration -> Radio1 (default name)
from the Brocade Mobility 7131N-FGR Access Point menu tree.
2. Configure the Properties field to assign a name and placement designation for the radio.