Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 552)

540 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Mesh network deployment - quick setup
9
Configuring AP#3
To define AP #3’s configuration:
1. The only change needed on AP#3 (with respect to the configuration used in scenario #1), is to
disable the Auto Link Selection option.
Click the Advanced button within the Mesh Client Bridge Settings field.
2. Add the 802.11a/n Radio MAC Address.
In scenario #2, the mesh WLAN is mapped to BSS1 on the 802.11a/n radio if each AP. The
Radio MAC Address (the BSSID#1 MAC Address) is used for the AP#2 Preferred Base Bridge
List. Ensure both the AP#1 and AP#2 Radio MAC Addresses are in the Available Base Bridge
List. Add the AP#2 MAC Address into the Preferred Base Bridge List.