Br7131n>admin(network.wan.nat)> show – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 300
288
Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Network commands
8
BR7131N>admin(network.wan.nat)> show
Displays Brocade Mobility 7131N-FGR Access Point NAT parameters.
Syntax
Example
admin(network.wan.nat)>show 2
WAN IP Mode
: enable
WAN IP Address
: 157.235.91.2
NAT Type
: 1-to-many
Inbound Mappings
: Port Forwarding
unspecified port forwarding mode
: enable
unspecified port fwd. ip address
: 111.223.222.1
one to many nat mapping
-------------------------------------------------------------------------------
LAN No.
WAN IP
-------------------------------------------------------------------------------
1
157.235.91.2
2
157.235.91.2
admin(network.wan.nat)>
For an overview of the NAT options available using the applet (GUI), see
Address Translation (NAT) settings”
show
<idx> <cr>
Displays Brocade Mobility 7131N-FGR Access Point NAT parameters for the
specified NAT index (1-8).