Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 353
Brocade Mobility 7131N-FGR Product Reference Guide
341
53-1001947-01
Network commands
8
BR7131N>admin(network.wireless.radio.802-11n[2.4 GHz])>show
Displays specific 802.11n (2.4 GHz) radio settings.
Syntax
Example
admin(network.wireless.radio.802-11n[2.4 GHz])>show radio
Radio Setting Information
Placement
: indoor
MAC Address
: 00A0F8715920
Radio Type
: 802.11n (2.4 GHz)
ERP Protection
: Off
HT Protection Mode
: Pure HT
Channel Setting
: user selection
Power Level
: 5 dbm (4 mW)
802.11 rate compatibility mode
: B, G, and N
Beacon Interval
: 100 K-usec
DTIM Interval
: 10 beacon intvls
short preamble
: disable
RTS Threshold
: 2341 bytes
QBSS Channel Util Beacon Intervl : 10 beacon intvls
QBSS Load Element Mode
: enable
Single Anetenna
: disable
admin(network.wireless.radio.802-11n[2.4 GHz])>show rates
Basic Rates
1 2 5.5 11
Supported Rates
1 2 5.5 6 9 11 12 18 24 36 48 54
Short Guard Interval
disable
-----------------------------------------------------------------------------
MCS Index
Basic/Supported
20 MHz Rate
40 MHz Rate
-----------------------------------------------------------------------------
0
Supported
6.5 Mbps
13.5 Mbps
1
Supported
13.0 Mbps
27.0 Mbps
2
Supported
19.5 Mbps
40.5 Mbps
3
Supported
26.0 Mbps
54.0 Mbps
4
Supported
39.0 Mbps
81.0 Mbps
5
Supported
52.0 Mbps
108.0 Mbps
6
Supported
58.5 Mbps
121.5 Mbps
7
Supported
65.0 Mbps
135.0 Mbps
8
Supported
13.0 Mbps
27.0 Mbps
9
Supported
26.0 Mbps
54.0 Mbps
10
Supported
39.0 Mbps
81.0 Mbps
show
radio
Displays specific 802.11n (2.4 GHz) radio settings.
rates
Displays specific 802.11n (2.4 GHz) radio rate settings.
aggr
Displays specific 802.11n (2.4 GHz) aggregation settings.
qos
Displays specific 802.11n (2.4 GHz) radio WMM QoS settings.