Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 236)

224 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Viewing wireless statistics
7
If a WLAN is not displayed within the Wireless Statistics Summary screen, see “Enabling Wireless
LANs (WLANs)” on page 119 to enable the WLAN. For information on configuring the properties of
individual WLANs, see “Creating/editing individual WLANs” on page 121.
To view Brocade Mobility 7131N-FGR Access Point WLAN Statistics:
1. Select Status and Statistics -> Wireless Stats from the Brocade Mobility 7131N-FGR Access
Point menu tree.
2. Refer to the WLAN Summary field to reference high-level data for each enabled WLAN.
Name Displays the names of all the enabled WLANs on the Brocade
Mobility 7131N-FGR Access Point. For information on enabling a
WLAN, see
“Enabling Wireless LANs (WLANs)” on page 119.
MUs Displays the total number of MUs currently associated with each
enabled WLAN. Use this information to assess if the MUs are
properly grouped by function within each enabled WLAN. To adjust
the maximum number of MUs permissible per WLAN, see
“Creating/editing individual WLANs” on page 121.
T-put Displays the total throughput in Megabits per second (Mbps) for
each active WLAN.
ABS Displays the Average Bit Speed (ABS) in Megabits per second
(Mbps) for each active WLAN displayed.
% NU Displays a percentage of the total packets for each active WLAN
that are non-unicast. Non-unicast packets include broadcast and
multicast packets.