Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 587
Advertising
Brocade Mobility 7131N-FGR Product Reference Guide
575
53-1001947-01
Configuring an IPSEC tunnel and VPN FAQs
B
11. For the ESP Type, select ESP with Authentication and use AES 128-bit as the ESP encryption
algorithm and SH1 as the ESP authentication algorithm. Click OK.
12. Select the IKE Settings button.
13. Select Pre Shared Key (PSK) from the IKE Authentication Mode drop-down menu.
14. Enter a Passphrase. Passphrases must match on both VPN devices.
NOTE
Ensure the IKE authentication Passphrase is the same as the Pre-shared key on the Cisco PIX
device.
15. Select AES 128-bit as the IKE Encryption Algorithm.
16. Select Group 2 as the Diffie -Hellman Group. Click OK. This will take you back to the VPN
screen.
Advertising