Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 217
Brocade Mobility 7131N-FGR Product Reference Guide
205
53-1001947-01
Configuring user authentication
6
1. Select System Configuration -> User Authentication -> RADIUS Server -> LDAP from the menu
tree.
CAUTION
Ensure IPSec has been properly configured to protect communications with the external LDAP
server. Changes will not be applied otherwise.
NOTE
For the onboard Radius server to work with Windows Active Directory or open LDAP as the
database, the user has to be present in a group within the organizational unit. The same group
must be present within the onboard Radius server’s database. The group configured within the
onboard Radius server is used for group policy configuration to support a new Time Based Rule
restriction feature.
NOTE
The LDAP screen displays with unfamiliar alphanumeric characters (if new to LDAP
configuration). Brocade recommends only qualified administrators change the default values
within the LDAP screen.
2. Enter the appropriate information within the LDAP Configuration field to allow the access point
to interoperate with the LDAP server. Consult with your LDAP server administrator for details
on how to define the values in this screen.