Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 58
46
Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Basic configuration
3
NOTE
The System Name and Country are also configurable within the System Settings screen. Refer to
on page 56 (if necessary) to set a system location and admin email
address for the Brocade Mobility 7131N-FGR Access Point or to view other default settings.
4. Refer to the new Radio Configuration field to define how WLAN and WIPS are supported by the
access point’s radio(s). Remember, the options available depend on the radio model SKU
deployed.
A dual radio model access point displays 7 configuration options. Refer to the following table
for the options available to dual radio models.
5. Select the Quick Setup screen’s Network Configuration tab to define a minimum set of WAN or
LAN configuration values. The WAN tab displays by default.
Radio Button
Brocade Mobility 7131N-FGR Access Point Dual Radio SKU
2.4 GHz WLAN,
& Sensor
Radio1 WLAN,
Radio 2 WIPS
5.0 GHz WLAN
& Sensor
Radio 1 WIPS,
Radio 2 WLAN
2.4 GHz WLAN &
5.0 GHz WLAN only - no Sensor
Radio 1 WLAN,
Radio 2 WLAN
Sensor only Spectrum Analysis mode
(no WLAN)
Radio 1 WIPS,
Radio 2 WIPS
2.4 GHz WLAN - no Sensor
Radio1 WLAN,
Radio 2 Disabled
5.0 GHz WLAN - no Sensor
Radio1 Disabled,
Radio 2 WLAN
Radios Off
Radios 1 and 2 Disabled