Br7131n>admin(network.wan.nat), Network wan nat commands – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 299
Advertising
Brocade Mobility 7131N-FGR Product Reference Guide
287
53-1001947-01
Network commands
8
Network WAN NAT commands
BR7131N>admin(network.wan.nat)>
Displays the NAT submenu. The items available under this command are shown below.
For an overview of the NAT configuration options available using the applet (GUI), see
“Configuring Network Address Translation (NAT) settings”
show
Displays the Brocade Mobility 7131N-FGR Access Point’s current NAT parameters for the
specified index.
set
Defines the Brocade Mobility 7131N-FGR Access Point NAT settings.
add
Adds NAT entries.
delete
Deletes NAT entries.
list
Lists NAT entries.
..
Goes to the parent menu.
/
Goes to the root menu.
save
Saves the configuration to system flash.
quit
Quits the CLI.
Advertising