Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 592
580
Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Configuring an IPSEC tunnel and VPN FAQs
B
These three rules should be configured above all other rules (default or user defined). When
Advanced LAN Access is used, certain inbound/outbound rules need to be configured to
control incoming/outgoing packet flow for IPSec to work properly (with Advanced LAN Access).
These rules should be configured first before other rules are configured.
•
Question 13: Do I need to add any special routes on the access point to get my VPN tunnel to
work?
No. However, clients could need extra routing information. Clients on the local LAN side should
either use the access point as their gateway or have a route entry tell them to use the access
point as the gateway to reach the remote subnet.