Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 250)

238 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Viewing the mesh statistics summary
7
4. Click the Ping button to begin transmitting ping packets to the station address specified.
Refer to the Number of Responses parameter to assess the number of responses from the
target MU versus the number of pings transmitted by the Brocade Mobility 7131N-FGR Access
Point. Use the ratio of packets sent versus packets received to assess the link quality between
MU and the Brocade Mobility 7131N-FGR Access Point
Click the Ok button to exit the Echo Test screen and return to the MU Stats Summary screen.
MU authentication statistics
The Brocade Mobility 7131N-FGR Access Point can access and display authentication statistics for
individual MUs.
To view Brocade Mobility 7131N-FGR Access Point authentication statistics for a specific MU:
1. Select Status and Statistics - > MU Stats from the Brocade Mobility 7131N-FGR Access Point
menu tree.
2. Highlight a target MU from within the MU List field.
3. Click the MU Authentication Statistics button
Use the displayed statistics to determine if the target MU would be better served with a
different Brocade Mobility 7131N-FGR Access Point WLAN or Brocade Mobility 7131N-FGR
Access Point radio.
4. Click Ok to return to the MU Stats Summary screen.
Viewing the mesh statistics summary
The Brocade Mobility 7131N-FGR Access Point has the capability of detecting and displaying the
properties of other access points in mesh network (either base bridges or client bridges) mode.
This information is used to create a list of known wireless bridges.
To view detected mesh network statistics:
Packet Length Specify the length of each data packet transmitted to the target
MU during the ping test. The default is 100 bytes.
Packet Data Defines the data to be transmitted as part of the test.