Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 258)

246 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Connecting to the CLI
8
1. If this is your first time connecting to your access point, keep in mind the access point uses a
static IP WAN address (10.1.1.1). Additionally, the access point’s LAN port is set as a DHCP
client.
2. Enter the default username of admin and the default password of admin123. If this is your
first time logging into the access point, you are unable to access any of the access point’s
commands until the country code is set. A new password will also need to be created.