Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 270)

258 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Network commands
8
BR7131N>admin(network.lan)> set
Sets the LAN parameters for the LAN port.
Syntax
Example
admin(network.lan)>
admin(network.lan)>set lan 1 enable
admin(network.lan)>set name 1 engineering
admin(network.lan)>set ethernet-port-lan 1
admin(network.lan)>set timeout 45
admin(network.lan)>set trunking 1 disable
set lan <mode> Enables or disables the Brocade Mobility 7131N-FGR
Access Point LAN interface.
name <idx-name > Defines the LAN name by index.
ethernet-port-lan <idx> Defines which LAN (LAN1 or LAN2) is active on the
Ethernet port.
timeout <seconds> Sets the interval (in seconds) the Brocade Mobility
7131N-FGR Access Point uses to terminate its LAN
interface if no activity is detected for the specified
interval.
trunking <mode> Enables or disables 802.11q Trunking over the Brocade
Mobility 7131N-FGR Access Point LAN port.
auto-negotiation <mode> Enables or disables auto-negotiation for the access
point LAN port.
speed <mbps> Defines the access point LAN port speed as either 10
Mbps or 100 Mbps.
duplex <mode> Defines the access port LAN port duplex as either half or
full.
username <name> Specifies user name for 802.1x port authentication over
the LAN interface.
passwd <password> The 0-32 character password for the username for the
802.1x port.
ip-mode <ip> Defines the Brocade Mobility 7131N-FGR Access Point
LAN port IP mode.
ipadr <ip> Sets the IP address used by the LAN port.
mask <ip> Defines the IP address used for Brocade Mobility
7131N-FGR Access Point LAN port network mask.
dgw <ip> Sets the Gateway IP address used by the LAN port.
domain <name> Specifies the domain name used by the Brocade
Mobility 7131N-FGR Access Point LAN port.
dns <ip> Sets the IP address of the primary and secondary DNS
servers.
wins <ip> Defines the IP address of the WINS server used by the
LAN port.