Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 339
Brocade Mobility 7131N-FGR Product Reference Guide
327
53-1001947-01
Network commands
8
retry
<number>
Sets the maximum number of MU
retries to <retry> (1-10).
syslog
<mode>
Enable or disable syslog
messages.
ip
<ip>
Defines syslog server IP address.
adv
mu-quiet
<time>
Set the EAP MU/supplicant quiet
period to <time> seconds
(1-65535).
mu-timeout
<timeout>
Sets the EAP MU/supplicant
timeout in seconds
(1-255).
mu-tx
<time>
Sets the EAP MU/supplicant TX
period <time> in seconds
(1-65535).
mu-retry
<count>
Sets the EAP maximum number
of MU retries to <count> (1-10).
svr-timeout
<time>
Sets the server timeout <time> in
seconds (1-255).
svr-retry
<count>
Sets the maximum number of
server retries to <count> (1-255).
enc
<idx>
<type>
Sets the encryption type to
<type> for the WLAN <idx>.
ccmp
rotate-
mode
<mode>
Enables or disabled the
broadcast key.
interva
l
<time>
Sets the broadcast key rotation
interval to <time> in seconds
(300-604800).
type
<key type>
Sets the CCMP key type.
phrase
<ascii phrase>
Sets the CCMP ASCII pass phrase
to <ascii phrase> (8-63
characters).
key
<256 bit key>
Sets the CCMP key to <256 bit
key>.