Br7131n>admin(network.wan.vpn)> add – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 306
Advertising
294
Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Network commands
8
BR7131N>admin(network.wan.vpn)> add
Adds a VPN tunnel entry.
Syntax
Example
admin(network.wan.vpn)>add 2 SJSharkey 209.235.44.31 206.107.22.46
255.255.255.224 206.107.22.1
If tunnel type is Manual, proper SPI values and Keys must be configured after
adding the tunnel
admin(network.wan.vpn)>
For information on configuring VPN using the applet (GUI), see
add
<name
>
<idx>
<LWanIP>
<RSubnetIP>
<RSubnetMask>
<RGatewayIP>
Creates a tunnel <name> (1 to 13 characters) to gain access through local WAN IP <LWanIP>
from the remote subnet with address <RSubnetIP> and subnet mask <RSubnetMask> using the
remote gateway <RGatewayIP>.
Advertising