Network lan commands, Network lan commands br7131n>admin(network.lan) – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 268
Advertising
256
Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Network commands
8
Network LAN commands
BR7131N>admin(network.lan)>
Displays the LAN submenu. The items available under this command are shown below.
For an overview of the LAN configuration options using the applet (GUI), see
show
Shows current Brocade Mobility 7131N-FGR Access Point LAN parameters.
set
Sets LAN parameters.
bridge
Goes to the mesh configuration submenu.
wlan-mapping
Goes to the WLAN/Lan/Vlan Mapping submenu.
dhcp
Goes to the LAN DHCP submenu.
type-filter
Goes to the Ethernet Type Filter submenu.
ipfpolicy
Goes to the LAN IP Filter Policy submenu.
..
Goes to the parent menu.
/
Goes to the root menu.
save
Saves the configuration to system flash.
quit
Quits the CLI.
Advertising