Br7131n>admin(system)>restart – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 413
Brocade Mobility 7131N-FGR Product Reference Guide
401
53-1001947-01
System commands
8
BR7131N>admin(system)>restart
Restarts the Brocade Mobility 7131N-FGR Access Point access point.
Syntax
Example
admin(system)>restart
********************************WARNING***********************************
** Unsaved configuration changes will be lost when the access point is reset.
** Please be sure to save changes before resetting.
**************************************************************************
Are you sure you want to restart the AP-7131N?? (yes/no):
BR-7131N-FGR Boot Firmware Version 4.0.0.0-350GRN
Copyright(c) Brocade 2010. All rights reserved.
Press escape key to run boot firmware ........
Power On Self Test
testing ram
: pass
testing nor flash
: pass
testing nand flash
: pass
testing ethernet
: pass
For information on restarting the access point using the applet (GUI), see
restart
Restarts the Brocade Mobility 7131N-FGR Access Point.