Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 80)

68 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Configuring data access
4
8. Refer to the Login Message field to optionally define a message displayed to the customer as
they login into the access point.
9. Click Apply to save any changes to the Brocade Mobility 7131N-FGR Access Point Access
screen. Navigating away from the screen without clicking the Apply button results in all
changes to the screen being lost.
10. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the
settings displayed on the Brocade Mobility 7131N-FGR Access Point Access screen to the last
saved configuration.
11. Click Logout to securely exit the Brocade Mobility 7131N-FGR Access Point Access Point
applet. A prompt displays confirming the logout before the applet is closed.
Message Settings Click the Message Settings button to display a screen used to
create a text message. Once displayed, select the Enable Login
Message checkbox to allow your customized message to be
displayed when the user is logging into the access point. If the
checkbox is not selected (as is the case by default), the user will
encounter the login screen with no additional message.
When the login message function is enabled, the user can enter a
(511 character maximum) message describing any usage caveat
required (such as the authorization disclaimer displayed on the
following page). Thus, the login message can serve an important
function by discouraging unauthorized users from illegally
managing the access point. As your message is entered, the
character usage counter is updated to allow you to visualize how
close you are coming to the maximum allowed number of
characters. Click the Clear button at any time to remove the
contents of the message and begin a new one. Once you have
finished creating your message, click the OK button to return to
the Access screen.