Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 549
Brocade Mobility 7131N-FGR Product Reference Guide
537
53-1001947-01
Mesh network deployment - quick setup
9
3. Create a mesh supported WLAN with the Enable Client Bridge Backhaul option selected.
NOTE
This WLAN should not be mapped to any radio. Therefore, leave both of the “Available On”
radio options unselected.
4. Select the Client Bridge checkbox to enable client bridge functionality on the 802.11a/n radio.
Use the Mesh Network Name drop-down menu to select the name of the WLAN created in step
3.
NOTE
You don't need to configure channel settings on the client bridge (AP#3). It automatically finds
the base bridges (AP#1 and AP#2) and uses the channel assigned to them.
5. If needed, create another WLAN mapped to the 802.11b/g/n radio if 802.11b/g/n support is
required for MUs on that 802.11 band.