Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 68)

56 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Configuring system settings
4
• Updating device firmware
Configuring system settings
Use the System Settings screen to specify the name and location of the Brocade Mobility
7131N-FGR Access Point, assign an email address for the network administrator, restore the AP’s
default configuration or restart the AP.
To configure System Settings for the Brocade Mobility 7131N-FGR Access Point:
CAUTION
The access point’s country of operation is set from within the System Settings screen. If the
country code is changed, the access point’s power level, primary channel and secondary channel
return to their default values. If changing the country code, be aware these values will require
modification to their previous settings.
1. Select System Configuration -> System Settings from the Brocade Mobility 7131N-FGR Access
Point menu tree.
2. Configure the Brocade Mobility 7131N-FGR Access Point System Settings field to assign a
system name and location, set the country of operation and view device version information.