Br7131n>admin(network.wan.vpn)> set – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 307
Brocade Mobility 7131N-FGR Product Reference Guide
295
53-1001947-01
Network commands
8
BR7131N>admin(network.wan.vpn)> set
Sets VPN entry parameters.
Syntax
set
type
<name>
<tunnel type>
Sets the tunnel type <name> to Auto or
Manual for the specified tunnel name.
authalgo
<name>
<authalgo>
Sets the authentication algorithm for <name>
to (None, MD5, or SHA1).
authkey
<name>
<dir>
<authkey>
Sets the AH authentication key (if type is
Manual) for tunnel <name> with the direction
set to IN or OUT, and the manual
authentication key set to <authkey>. (The key
size is 32 hex characters for MD5, and 40 hex
characters for SHA1).
esp-type
<name>
<esptype>
Sets the Encapsulating Security Payload (ESP)
type. Options include None, ESP, or ESP-AUTH.
esp-encalgo
<name>
<escalgo>
Sets the ESP encryption algorithm. Options
include DES, 3DES, AES128, AES192, or
AES256).
esp-enckey
<name>
<dir>
<enckey>
Sets the Manual Encryption Key in ASCII for
tunnel <name> and direction IN or OUT to the
key <enc-key>. The size of the key depends on
the encryption algorithm.
- 16 hex characters for DES
- 48 hex characters for 3DES
- 32 hex characters for AES128
- 48 hex characters for AES192
- 64 hex characters for AES256
esp-authalgo
<name>
<authalgo>
Sets the ESP authentication algorithm. Options
include MD5 or SHA1.
esp-authkey
<name>
<dir>
<authkey>
Sets ESP Authentication key <name> either
for IN or OUT direction to <auth-key>, an ASCII
string of hex characters. If authalgo is set to
MD5, then provide 32 hex characters. If
authalgo is set to SHA1, provide 40 hex
characters.
spi
<name>
<algo> <dir>
<value>
Sets 6 character IN(bound) or OUT(bound) for
AUTH (Manual Authentication) or ESP for
<name> to <spi> (a hex value more than 0xFF)
<value>.
usepfs
<name>
<mode>
Enables or disables Perfect Forward Secrecy
for <name>.