Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 167)

Brocade Mobility 7131N-FGR Product Reference Guide 155
53-1001947-01
Configuring router settings
5
3. If RIP v2 or RIP v2 (v1 compat) is the selected RIP type, the RIP v2 Authentication field
becomes active. Select the type of authentication to use from the Authentication Type
drop-down menu. Available options include:
If a RIP type is set, a message displays warning of compromises to the LAN or LAN firewall.
Select Yes to acknowledge the risk and continue or No to return to the Router screen.
4. If the Simple authentication method is selected, specify a password of up to 15 alphanumeric
characters in the Password (Simple Authentication) area.
5. If the MD5 authentication method is selected, fill in the Key #1 field (Key #2 is optional). Enter
any numeric value between 0 and 256 into the MD5 ID area. Enter a string consisting of up to
16 alphanumeric characters in the MD5 Auth Key area.
None This option disables the RIP authentication.
Simple This option enable RIP version 2’s simple authentication
mechanism. This setting activates the Password (Simple
Authentication) field.
MD5 This option enables the MD5 algorithm for data verification. MD5
takes as input a message of arbitrary length and produces a
128-bit fingerprint. The MD5 setting activates the RIP v2
Authentication settings for keys (below).