Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 507)

Brocade Mobility 7131N-FGR Product Reference Guide 495
53-1001947-01
System commands
8
Firmware update commands
BR7131N>admin(system)>fw-update
Displays the firmware update submenu. The items available under this command are shown
below.
NOTE
The access point must complete the reboot process to successfully update the device firmware,
regardless of whether the reboot is conducted uing the GUI or CLI interfaces.
show Displays the current Brocade Mobility 7131N-FGR Access Point firmware update settings.
set Defines the Brocade Mobility 7131N-FGR Access Point firmware update parameters.
update Executes the firmware update.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the current configuration to the Brocade Mobility 7131N-FGR Access Point system flash.
quit Quits the CLI and exits the current session.