Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 189)

Brocade Mobility 7131N-FGR Product Reference Guide 177
53-1001947-01
Configuring firewall settings
6
1. Select Network Configuration -> Firewall -> Advanced Subnet Access from the Brocade
Mobility 7131N-FGR Access Point menu tree.
2. Configure the Settings field as needed to override the settings in the Subnet Access screen
and import firewall rules into the Advanced Subnet Access screen.
3. Configure the Firewall Rules field as required add, insert or delete firewall rules into the list of
advanced rules.
Override Subnet Access
settings Select this checkbox to enable advanced subnet access rules and
disable existing subnet access rules, port forwarding, and 1 to
many mappings from the system. Only enable advanced subnet
access rules if your configuration requires rules that cannot be
configured within the Subnet Access screen.
Import rules from
Subnet Access Select this checkbox to import existing access rules (NAT, packet
forwarding, VPN rules etc.) into the Firewall Rules field. This rule
import overrides any existing rules configured in the Advanced
Subnet Access screen. A warning box displays stating the
operation cannot be undone.
Inbound or Outbound Select Inbound or Outbound from the drop-down menu to specify if
a firewall rule is intended for inbound traffic to an interface or
outbound traffic from that interface.
Add Click the Add button to insert a new rule at the bottom of the table.
Click on a row to display a new window with configuration options
for that field.
Insert Click the Insert button to insert a new rule directly above a
selected rule in the table. Clicking on a field in the row displays a
new window with configuration options.