Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 72
60
Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Configuring power settings
4
Radios at full power
The table below describes the maximum transmit power available to each radio (at varying data
rates) when the access point is receiving full DC power and is not compromised in its power budget.
These values should be viewed as the safe limit for the access point’s radio at full power and
should not be exceeded.
Radios at low power
The table below describes the maximum transmit power available to each radio (at varying data
rates) when the access point is receiving low DC power in either af or at mode.
CAUTION
Exceeding the limits listed below can cause damage to the access point or cause the radio to
operate unpredictably. Thus, these values should be viewed as the safe limit for the access
point’s radio and should not be exceeded in either af or at mode.
Rates (Mbps)
MCS Indices
EVM
Bandwidth
Maximum Transmit
Power 2.4 GHz
Maximum Transmit
Power 5 GHz
1
-9
20MHz
23
NA
2
-9
20MHz
23
NA
5.5
-9
20MHz
23
NA
11
-9
20MHz
23
NA
6
-5
20MHz
23
20
9
-8
20MHz
23
20
12
-10
20MHz
23
20
18
-13
20MHz
23
20
24
-16
20MHz
22
20
36
-19
20MHz
22
19
48
-22
20MHz
21
18
54
-25
20MHz
20
17
MCS0/MCS8
-5
HT20/40
23
20
MCS1/MCS9
-10
HT20/40
23
20
MCS2/MCS10
-13
HT20/40
23
20
MCS3/MCS11
-16
HT20/40
23
19
MCS4/MCS12
-19
HT20/40
22
19
MCS5/MCS13
-22
HT20/40
22
18
MCS6/MCS14
-25
HT20/40
21
17
MCS7/MCS15
-28
HT20/40
20
17