Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 295)

Brocade Mobility 7131N-FGR Product Reference Guide 283
53-1001947-01
Network commands
8
Network WAN commands
BR7131N>admin(network.wan)>
Displays the WAN submenu. The items available under this command are shown below.
For an overview of the WAN configuration options using the applet (GUI), see “Configuring WAN
settings” on page 111.
show Displays the Brocade Mobility 7131N-FGR Access Point WAN configuration and the Brocade
Mobility 7131N-FGR Access Point’s current PPPoE configuration.
set Defines the Brocade Mobility 7131N-FGR Access Point’s WAN and PPPoE configuration.
nat Displays the NAT submenu, wherein Network Address Translations (NAT) can be defined.
vpn Goes to the VPN submenu, where the Brocade Mobility 7131N-FGR Access Point VPN tunnel
configuration can be set.
content Goes to the outbound content filtering menu.
dyndns Displays the Dynamic DNS submenu, wherein dyndns settings can be defined.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the current configuration to the Brocade Mobility 7131N-FGR Access Point system flash.
quit Quits the CLI and exits the current session.