Br7131n>admin(network.wan.nat)> add – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 302
290
Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Network commands
8
BR7131N>admin(network.wan.nat)> add
Adds NAT entries.
Syntax
Example
admin(network.wan.nat)>add 1 indoors udp 20 29 10.10.2.2
admin(network.wan.nat)>list 1
-----------------------------------------------------------------------------
index
name
Transport start port
end port
internal ip
translation
-----------------------------------------------------------------------------
1
indoor udp
20
29
10.10.2.2
0
For an overview of the NAT options available using the applet (GUI), see
Address Translation (NAT) settings”
add
<idx>
<name>
<tran>
<port1>
<port2>
<ip>
<dst_port>
Sets an inbound network address translation (NAT) for WAN address <idx>, where <name> is the name of
the entry (1 to 7 characters), <tran> is the transport protocol (one of tcp, udp, icmp, ah, esp, gre, or all),
<port1> is the starting port number in a port range, <port2> is the ending port number in a port range,
<ip> is the internal IP address, and <dst_port> is the (optional) internal translation port.