Br7131n>admin(network.wan.vpn)> ikestate – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 313
Brocade Mobility 7131N-FGR Product Reference Guide
301
53-1001947-01
Network commands
8
BR7131N>admin(network.wan.vpn)> ikestate
Displays statistics for all active tunnels using Internet Key Exchange (IKE).
Syntax
Example
admin(network.wan.vpn)>ikestate
----------------------------------------------------------------------
Tunnel Name
IKE State
Dest IP
Remaining Life
----------------------------------------------------------------------
Eng2EngAnnex Not Connected
----
---
SJSharkey
Not Connected
----
---
admin(network.wan.vpn)>
For information on configuring IKE using the applet (GUI), see
“Configuring IKE key settings”
ikestate
Displays status about Internet Key Exchange (IKE) for all tunnels. In particular, the table
indicates whether IKE is connected for any of the tunnels, it provides the destination IP
address, and the remaining lifetime of the IKE key.