Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 405)

Brocade Mobility 7131N-FGR Product Reference Guide 393
53-1001947-01
Network commands
8
BR7131N>admin(network.firewall)> advanced
Displays whether an Brocade Mobility 7131N-FGR Access Point firewall rule is intended for
inbound traffic to an interface or outbound traffic from that interface..
Syntax
Example
admin(network.firewall.adv-lan-access)>inbound
admin(network.firewall.adv-lan-access.inb)>list
-----------------------------------------------------------------------------
Idx SCR IP-Netmask Dst IP-Netmask TP SPorts DPorts Rev NAT Action
-----------------------------------------------------------------------------
1 1.2.3.4 2.2.2.2 all 1: 1: 0.0.0.0 deny
255.0.0.0 255.0.0.0 65535 65535 nat port 33
2 33.3.0.0 10.10.1.1 tcp 1: 1: 11.11.1.0 allow
255.255.255.0 255.255.255.0 65535 65535 nat port 0
For information on configuring the Firewall options available to the access point using the applet
(GUI), see
“Configuring firewall settings” on page 171.
show Shows advanced subnet access parameters.
set Sets advanced subnet access parameters.
import Imports rules from subnet access.
inbound Goes to the Inbound Firewall Rules submenu.
outbound Goes to the Outbound Firewall Rules submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to flash memory.
quit Quits and exits the CLI session.