Br7131n>admin(network.lan.wlan-mapping)> set – Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) User Manual
Page 278
266
Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Network commands
8
BR7131N>admin(network.lan.wlan-mapping)> set
Sets VLAN parameters for the Brocade Mobility 7131N-FGR Access Point.
Syntax
Example
admin(network.lan.wlan-mapping)>set mgmt-tag 1 10
admin(network.lan.wlan-mapping)>set native-tag 1 12
admin(network.lan.wlan-mapping)>set mode 1 static
admin(network.lan.wlan-mapping)>show vlan-cfg
-----------------------------------------------------------------------------
LAN No.
Management VLAN Tag
Native VLAN Tag
-----------------------------------------------------------------------------
1
10
12
2
1
1
WLAN
:WLAN1
mapped to VLAN
:<none>
VLAN Mode
:static
For information on configuring VLANs using the applet (GUI), see
set
mgmt- tag
<id>
Defines the Management VLAN tag index (1 or 2) to tag number (1-4095).
native-tag
<id>
Sets the Native VLAN tag index (1 or 2) to tag number (1-4095).
mode
<wlan-idx>
Sets WLAN VLAN mode (WLAN 1-16) to either dynamic or static.