Kontron AT890X Full-Size CLI - Manual (Page 131)

AT8901/2/3 Routing Commands
Page 3 - 19 AT8901/2/3 CLI Reference Manual
3.5.4 ip vrrp authentication
This command sets the authorization details value for the virtual router configured on a
specified interface. The parameter
{none | simple}
specifies the authorization type
for virtual router configured on the specified interface. The parameter
[key]
is
optional, it is only required when authorization type is simple text password. The
parameter
<vrid>
is the virtual router ID which has an integer value ranges from 1 to
255.
Default no authorization
Format
ip vrrp <vrid> authentication {none | simple <key>}
Mode Interface Config
3.5.4.1 no ip vrrp authentication
This command sets the default authorization details value for the virtual router
configured on a specified interface.
Format no ip vrrp <vrid> authentication
Mode Interface Config
3.5.5 ip vrrp preempt
This command sets the preemption mode value for the virtual router configured on a
specified interface. The parameter
<vrid> is the virtual router ID, which is an integer
from 1 to 255
Default enabled
Format ip vrrp <vrid> preempt
Mode Interface Config
3.5.5.1 no ip vrrp preempt
This command sets the default preemption mode value for the virtual router configured
on a specified interface.
Format
no ip vrrp <vrid> preempt
Mode Interface Config
3.5.6 ip vrrp priority
This command sets the priority value for the virtual router configured on a specified
interface. The priority of the interface is a priority integer from 1 to 254. The parameter
<vrid>
is the virtual router ID which has an integer value ranges from 1 to 255.
Default 100
Format
ip vrrp <vrid> priority <1-254>
Mode Interface Config