Kontron AT890X Full-Size CLI - Manual (Page 156)

Routing Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 3 - 44
Full - the neighboring routers are fully adjacent and they will now
appear in router-LSAs and network-LSAs.
Dead Time Shows the amount of time, in seconds, to wait before the router
assumes the neighbor is unreachable.
If you specify an IP address for the neighbor router, the following fields display:
Interface Valid slot and port number separated by forward slashes.
Neighbor IP Address Shows the IP address of the neighbor router.
Interface Index Shows the interface ID of the neighbor router.
Area ID
Shows the area ID of the OSPF area associated with the interface.
Options An integer value that indicates the optional OSPF capabilities sup-
ported by the neighbor. The neighbor's optional OSPF capabilities are
also listed in its Hello packets. This enables received Hello Packets to
be rejected (i.e., neighbor relationships will not even start to form) if
there is a mismatch in certain crucial OSPF capabilities.
Router Priority Displays the OSPF priority for the specified interface. The priority of
an interface is a priority integer from 0 to 255. A value of '0' indicates
that the router is not eligible to become the designated router on this
network.
Dead Timer Due Shows the amount of time, in seconds, to wait before the router
assumes the neighbor is unreachable.
State Shows the state of the neighboring routers.
Events The number of times this neighbor relationship has changed state, or
an error has occurred.
Retransmission Queue Length Is an integer representing the current length of the
retransmission queue of the specified neighbor router Id of the speci-
fied interface.
3.7.50 show ip ospf range
This command displays information about the area ranges for the specified <
areaid
>.
The <
areaid
> identifies the OSPF area whose ranges are being displayed.
Format show ip ospf range <areaid>
Modes Privileged EXEC
User EXEC
Area ID The area id of the requested OSPF area.
IP Address An IP Address which represents this area range.
Subnet Mask A valid subnet mask for this area range.
Lsdb Type
The type of link advertisement associated with this area range.
Advertisement The status of the advertisement. Advertisement has two possible set-
tings: enabled or disabled.