Kontron AT890X Full-Size CLI - Manual (Page 200)

Utility Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 5 - 2
5. Utility Commands
This chapter describes the utility commands available in the CLI.
The Utility Commands chapter includes the following sections:
• 5.1 “Commands for accessing base/extension fabric” on page 5 - 2
• 5.2 “Commands for download and startup Configuration” on page 5 - 2
• 5.3 “ATCA commands” on page 5 - 4
• 5.4 “System Information and Statistics Commands” on page 5 - 6
• 5.5 “Logging Commands” on page 5 - 20
• 5.6 “System Utility and Clear Commands” on page 5 - 23
• 5.7 “Keying for Advanced Features” on page 5 - 28
• 5.8 “Simple Network Time Protocol (SNTP) Commands” on page 5 - 28
• 5.9 “DHCP Server Commands” on page 5 - 32
• 5.10 “DHCP Filtering” on page 5 - 42
The commands in this chapter are in one of four functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration
setting.
• Copy commands transfer or save configuration and informational files to and from
the switch.
• Clear commands clear some or all of the settings to factory defaults.
5.1 Commands for accessing base/extension fabric
The commands in chapter 5.1 are only available for AT8902.
5.1.1 base
This command is only available on the extension fabric. It allows the user to login on
the base fabric interface and configure the base fabric.
Format
base
Mode Privileged EXEC
5.1.2 extension
This command is only available on the base fabric. It allows the user to login on the
extension fabric interface and configure the extension fabric.
Format
extension
Mode Privileged EXEC
5.2 Commands for download and startup Configuration
The following commands are implemented to manipulate the Software images and
configurations of the AT8901/2/3. The slot number (<slotnumber>) ranges from 0 - 9.