Kontron AT890X Full-Size CLI - Manual (Page 228)

Utility Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 5 - 30
Default 6
Format
sntp unicast client poll-interval <poll-interval>
Mode Global Config
5.8.4.1 no sntp unicast client poll-interval
This command resets the poll interval for SNTP unicast clients to its default value.
Format no sntp unicast client poll-interval
Mode Global Config
5.8.5 sntp unicast client poll-timeout
This command will set the poll timeout for SNTP unicast clients in seconds to a value
from 1-30.
Default 5
Format
sntp unicast client poll-timeout <poll-timeout>
Mode Global Config
5.8.5.1 no sntp unicast client poll-timeout
This command will reset the poll timeout for SNTP unicast clients to its default value.
Format no sntp unicast client poll-timeout
Mode Global Config
5.8.6 sntp unicast client poll-retry
This command will set the poll retry for SNTP unicast clients to a value from 0 to 10.
Default 1
Format
sntp unicast client poll-retry <poll-retry>
Mode Global Config
5.8.6.1 no sntp unicast client poll-retry
This command will reset the poll retry for SNTP unicast clients to its default value.
Format no sntp unicast client poll-retry
Mode Global Config
5.8.7 sntp multicast client poll-interval
This command will set the poll interval for SNTP multicast clients in seconds as a
power of two where
<poll-interval> can be a value from 6 to 16.
Default 6
Format
sntp multicast client poll-interval <poll-interval>
Mode Global Config