5 port, 6 priority, 7 timeout – Kontron AT890X Full-Size CLI User Manual
Page 274: 8 show tacacs, Port - 32, Priority - 32, Timeout - 32, Show tacacs - 32
Management Commands
AT8901/2/3
AT8901/2/3 CLI Reference Manual
Page 6 - 32
<key-string>
parameter specifies the key name. For an empty string use “ ”. (Range:
0 - 128 characters).
Format
key
<key-string>
Mode
TACACS Config
6.9.5
port
Use the
port
command in TACACS Configuration mode to specify a server port
number. The server
<port-number>
range is 0 - 65535.
Default
49
Format
port
<port-number>
Mode
TACACS Config
6.9.6
priority
Use the
priority
command in TACACS Configuration mode to specify the order in
which servers are used, where 0 (zero) is the highest priority. The
<priority>
parameter specifies the priority for servers. The highest priority is 0 (zero), and the
range is 0 - 65535.
Default
0
Format
priority
<priority>
Mode
TACACS Config
6.9.7
timeout
Use the
timeout
command in TACACS Configuration mode to specify the timeout
value in seconds. If no timeout value is specified, the global value is used. The
<timeout>
parameter has a range of 1-30 and is the timeout value in seconds.
Format
timeout
<timeout>
Mode
TACACS Config
6.9.8
show tacacs
Use the
show tacacs
command to display the configuration and statistics of a
TACACS+ server.
Format
show tacacs
[<ip-address>]
Mode
Privileged EXEC
IP address
Shows the IP address of the configured TACACS+ server.
Port
Shows the configured TACACS+ server port number.
TimeOut
Shows the timeout in seconds for establishing a TCP connection.
Priority
Shows the preference order in which TACACS+ servers are contacted.
If a server connection fails, the next highest priority server is con-
tacted.