Kontron AT890X Full-Size CLI - Manual (Page 196)

Quality of Service (QoS) Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 4 - 30
Mode Global Config
4.8.3.1 no acl-trapflags
This command disables the ACL trap mode.
Format
no acl-trapflags
Mode Global Config
4.8.4 show ip access-lists
This command displays an IP ACL
<accesslistnumber>
is the number used to
identify the IP ACL.
Format
show ip access-lists <accesslistnumber>
Mode Privileged EXEC
NOTE: Only the access list fields that you configure are displayed.
Rule Number This displays the number identifier for each rule that is defined for the
IP ACL.
Action This displays the action associated with each rule. The possible values
are Permit or Deny.
Match All Indicates whether this access list applies to every packet. Possible val-
ues are True or False.
Protocol This displays the protocol to filter for this rule.
Source IP Address This displays the source IP address for this rule.
Source IP Mask This field displays the source IP Mask for this rule.
Source L4 Port Keyword This field displays the source port for this rule.
Destination IP Address This displays the destination IP address for this rule.
Destination IP Mask This field displays the destination IP Mask for this rule.
Destination L4 Port Keyword This field displays the destination port for this rule.
IP DSCP
This field indicates the value specified for IP DSCP.
IP Precedence This field indicates the value specified IP Precedence.
IP TOS
This field indicates the value specified for IP TOS.
Log Displays when you enable logging for the rule.
Assign Queue Displays the queue identifier to which packets matching this rule are
assigned.
Mirror Interface Displays the unit/slot/port to which packets matching this rule are
copied.
Redirect Interface Displays the unit/slot/port to which packets matching this rule are
forwarded.