Kontron AT890X Full-Size CLI - Manual (Page 186)

Quality of Service (QoS) Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 4 - 20
Class Name The name of this class. (Note that the order in which classes are dis-
played is not necessarily the same order in which they were created.)
Class Type A class type of ‘all’ means every match criterion defined for the class
is evaluated simultaneously and must all be true to indicate a class
match.
Ref Class Name The name of an existing DiffServ class whose match conditions are
being referenced by the specified class definition.
4.6.2 show diffserv
This command displays the DiffServ General Status Group information, which
includes the current administrative mode setting as well as the current and maximum
number of rows in each of the main DiffServ private MIB tables. This command takes
no options.
Format show diffserv
Mode Privileged EXEC
DiffServ Admin mode The current value of the DiffServ administrative mode.
Class Table Size The current number of entries (rows) in the Class Table.
Class Table Max The maximum allowed entries (rows) for the Class Table.
Class Rule Table Size The current number of entries (rows) in the Class Rule Table.
Class Rule Table Max The maximum allowed entries (rows) for the Class Rule
Table.
Policy Table Size The current number of entries (rows) in the Policy Table.
Policy Table Max The maximum allowed entries (rows) for the Policy Table.
Policy Instance Table Size Current number of entries (rows) in the Policy Instance
Table.
Policy Instance Table Max Maximum allowed entries (rows) for the Policy Instance
Table.
Policy Attribute Table Size Current number of entries (rows) in the Policy Attribute
Table.
Policy Attribute Table Max Maximum allowed entries (rows) for the Policy
Attribute Table.
Service Table Size The current number of entries (rows) in the Service Table.
Service Table Max The maximum allowed entries (rows) for the Service Table.
4.6.3 show policy-map
This command displays all configuration information for the specified policy. The
<policyname>
is the name of an existing DiffServ policy.
Format show policy-map [policyname]
Mode Privileged EXEC
If the Policy Name is specified the following fields are displayed: