Kontron AT890X Full-Size CLI - Manual (Page 220)

Utility Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 5 - 22
5.5.7 logging syslog
This command enables syslog logging. The
<portid>
parameter is an integer with a
range of 1-65535.
Default disabled
Format logging syslog [port <portid>]
Mode Global Config
5.5.7.1 no logging syslog
This command disables syslog logging.
Format
no logging syslog
Mode Global Config
5.5.8 show logging
This command displays logging configuration information.
Format
show logging
Mode Privileged EXEC
Logging Client Local Port Port on the collector/relay to which syslog messages are
sent.
CLI Command Logging Shows whether CLI Command logging is enabled.
Console Logging Shows whether console logging is enabled.
Console Logging Severity Filter The minimum severity to log to the console log.
Messages with an equal or lower numerical severity are logged.
Buffered Logging Shows whether buffered logging is enabled.
Syslog Logging Shows whether syslog logging is enabled.
Log Messages Received Number of messages received by the log process. This
includes messages that are dropped or ignored.
Log Messages Dropped Number of messages that could not be processed due to error
or lack of resources.
Log Messages Relayed Number of messages sent to the collector/relay.
5.5.9 show logging buffered
This command displays buffered logging (system startup and system operation logs).
Format show logging buffered
Mode Privileged EXEC
Buffered (In-Memory) Logging Shows whether the In-Memory log is enabled or
disabled.
Buffered Logging Wrapping Behavior The behavior of the In Memory log when
faced with a log full situation.
Buffered Log Count The count of valid entries in the buffered log.