Kontron AT890X Full-Size CLI - Manual (Page 163)

AT8901/2/3 Routing Commands
Page 3 - 51 AT8901/2/3 CLI Reference Manual
added to any match types presently being redistributed. Internal routes are redistributed
by default.
Default metric—not-configured
match—internal
Format for OSPF as source protocol
redistribute ospf [metric <0-15>] [match [internal]
[external 1] [external 2] [nssa-external 1] [nssa-exter-
nal-2]]
Format for other source protocol
redistribute {bgp | static | connected} [metric <0-15>]
Mode Router RIP Config
3.8.14.1 no redistribute
This command de-configures RIP protocol to redistribute routes from the specified
source protocol/routers.
Format
no redistribute {ospf | bgp | static | connected} [metric]
[match [internal] [external 1] [external 2] [nssa-external
1] [nssa-external-2]]
Mode Router RIP Config
3.8.15 show ip rip
This command displays information relevant to the RIP router.
Format
show ip rip
Modes Privileged EXEC
User EXEC
RIP Admin Mode Enable or disable.
Split Horizon Mode None, simple or poison reverse.
Auto Summary Mode Enable or disable. If enabled, groups of adjacent routes are
summarized into single entries, in order to reduce the total number of
entries The default is enable.
Host Routes Accept Mode Enable or disable. If enabled the router accepts host
routes. The default is enable.
Global Route Changes The number of route changes made to the IP Route Database
by RIP. This does not include the refresh of a route's age.
Global queries The number of responses sent to RIP queries from other systems.
Default Metric Sets a default for the metric of redistributed routes.This field displays
the default metric if one has already been set or blank if not configured
earlier. The valid values are (1 to 15)
Default Route Advertise The default route.