Kontron AT890X Full-Size CLI - Manual (Page 238)

Utility Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 5 - 40
5.9.22 clear ip dhcp server statistics
This command clears DHCP server statistics counters.
Format
clear ip dhcp server statistics
Mode Privileged EXEC
5.9.23 clear ip dhcp conflict
The command is used to clear an address conflict from the DHCP Server database. The
server detects conflicts using a ping. DHCP server clears all conflicts If the asterisk (*)
character is used as the address parameter.
Default none
Format
clear ip dhcp conflict {<address> | *}
Mode Privileged EXEC
5.9.24 show ip dhcp binding
This command displays address bindings for the specific IP address on the DHCP
server. If no IP address is specified, the bindings corresponding to all the addresses are
displayed.
Format
show ip dhcp binding [<address>]
Modes Privileged EXEC
User EXEC
IP address The IP address of the client.
Hardware Address The MAC Address or the client identifier.
Lease expiration The lease expiration time of the IP Address assigned to the client.
Type
The manner in which IP Address was assigned to the client.
5.9.25 show ip dhcp global configuration
This command displays address bindings for the specific IP address on the DHCP
server. If no IP address is specified, the bindings corresponding to all the addresses are
displayed.
Format
show ip dhcp global configuration
Modes Privileged EXEC
User EXEC
Service DHCP The field to display the status of dhcp protocol.
Number of Ping Packets The maximum number of Ping Packets that will be sent to
verify that an ip address id not already assigned.
Conflict Logging Shows whether conflict logging is enabled or disabled.
BootP Automatic Shows whether BootP for dynamic pools is enabled or disabled.