Kontron AT890X Full-Size CLI - Manual (Page 4)

Preface AT8901/2/3
AT8901/2/3 CLI Reference Manual Page iv
P R
E L
I
M I
N A R Y
names, company logos and trademarks, which are registered trademarks and, therefore,
proprietary to their respective owners.
Environmental Protection Statement
This product has been manufactured to satisfy environmental protection requirements where
possible. Many of the components used (structural parts, printed circuit boards, connectors,
batteries, etc.) are capable of being recycled.
Final disposition of this product after its service life must be accomplished in accordance with
applicable country, state, or local laws or regulations.
Explanation of Symbols
For Your Safety
CE Conformity
This symbol indicates that the product described in this manual is in com-
pliance with all applied CE standards. Please refer also to the section
“Applied Standards” in this manual.
Caution, Electric Shock!
This symbol and title warn of hazards due to electrical shocks (> 60V)
when touching products or parts of them. Failure to observe the precautions
indicated and/or prescribed by the law may endanger your life/health and/or
result in damage to your material.
Please refer also to the section “High Voltage Safety Instructions” on the
following page.
Warning, ESD Sensitive Device!
This symbol and title inform that electronic boards and their components
are sensitive to static electricity. Therefore, care must be taken during all
handling operations and inspections of this product, in order to ensure prod-
uct integrity at all times.
Please read also the section “Special Handling and Unpacking Instructions”
on the following page.
Warning!
This symbol and title emphasize points which, if not fully understood and
taken into consideration by the reader, may endanger your health and/or
result in damage to your material.
Note...
This symbol and title emphasize aspects the reader should read through
carefully for his or her own advantage.