Kontron AT890X Full-Size CLI - Manual (Page 254)

Management Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 6 - 12
6.4.3.1 no ip ssh server enable
This command disables the IP secure shell server.
Format
no ip ssh server enable
Mode Privileged EXEC
6.4.4 sshcon maxsessions
This command specifies the maximum number of SSH connection sessions that can be
established. A value of 0 indicates that no ssh connection can be established. The range
is 0 to 5.
Default 5
Format
sshcon maxsessions <0-5>
Mode Privileged EXEC
6.4.4.1 no sshcon maxsessions
This command sets the maximum number of allowed SSH connection sessions to the
default value.
Format no sshcon maxsessions
Mode Privileged EXEC
6.4.5 sshcon timeout
This command sets the SSH connection session timeout value, in minutes. A session is
active as long as the session has been idle for the value set. The time is a decimal value
from 1 to 160.
Changing the timeout value for active sessions does not become effective until the
session is re accessed. Also, any keystroke activates the new timeout duration.
Default 5
Format
sshcon timeout <1-160>
Mode Privileged EXEC
6.4.5.1 no sshcon timeout
This command sets the SSH connection session timeout value, in minutes, to the
default.
Changing the timeout value for active sessions does not become effective until the
session is re accessed. Also, any keystroke activates the new timeout duration.
Format
no sshcon timeout
Mode Privileged EXEC
6.4.6 show ip ssh
This command displays the ssh settings.
Format
show ip ssh